Welcome to the home of arcadecrt.com - arcadecup.com
Keep them running! Rekindling arcade spirits since 2005!
Video monitor board repair excellence.
Quality, speed, dedication and integrity.
Proprietor - Curator - Operations - Chad Entringer!
Send in your boards for repair at will. No verbal or email approval required to initiate repair process as long as the model is on the repair list from monitor repair price list tab. Fill out the repair form and ship away!
My purpose is to aid in the repair and preservation of video arcade, gaming and bowling alley equipment by means of specializing in monitor chassis board repair. A sincere advocator of the video arcade scene.
Call:920-883-8905 E-mail: Click Here
All monitor repair prices include return shipping
All monitor boards go through thorough analysis & reconditioning after repair to assure long future reliability.
Present turnaround time about: 34 - 43 Days
High quality name brand components used. No Bootlegs / No Generics.
Price includes return shipping to you covering USA! Flat Rate Prices.
Please do not forget to send in your remote adjustment board if it uses one.
Boards that arrive cracked due to poor packaging may be rejected.
All repairs that have the cost of $110 will be $140 if a new replacement flyback is needed. Important: Please use strong boxes that will not buckle under stacked boxes and pack with care. One or Two inches of padding surrounding your board is strongly recommended. Please don't use worn out boxes. Sanyo EZV's & the Hantaerex polo's are the most fragile of monitor boards. I receive more of these cracked on arrival from inadequate packaging than any other.
Amplifone
Part
Model #
Description
Price
Atari Amplifone (x-y Vector)
Bad flyback / EHT unit?. SAME CHARGE! Repair price includes NEW FLYBACK REPLACEMENT!
$140.00
Arachnid
Part
Model #
Description
Price
SB31-8U/V
12" Amber Monochrome Monitor. You must send in entire monitor. Ship with extra care for safe arrival.
$135.00
Ceronix
Part
Model #
Description
Price
2793 Ceronix
Ceronix 2793 CGA monitor board.
$110.00 $140.00
Daewoo
Part
Model #
Description
Price
531XN
14" VGA Monitor. You must send in entire monitor. Ship with extra care for safe arrival.
$135.00
Duckson
Part
Model #
Description
Price
Type-55 13" vga / merit
13 merit vga cmg-1301
$110.00
CGM 1301
CGM 1301 13" DUCKSON
110.00
Electrohome
Part
Model #
Description
Price
G05 (801 / 802 -805) 15" 19"
Black & White vector / asteroids , includes hv cage full cap out. Send in monitor frame with boards attached. remove glass tube. do not send CRT glass tube.
160.00
Eygo G07 Type
19" G07 substitute monitor board.
$110.00 $140.00
G08
Color Vector - star trek, space fury, more No Longer servicing the G08
$125.00
G07 19"
Rivals many new monitors when refurbished and rejuvenated. (Automatically NEW FLYBACK, cap out & coil!) If flyback, caps and coil already replaced bump down to $110.00
$140.00
Elo / Tyco
Part
Model #
Description
Price
1788 / 1788C / 1988c
15" 17" 19" VGA / SUPER VGA Touch monitor. Sent entire monitor or just the chassis / monitor board. Monitor board fix only not the touch module.
$120.00
GoldStar
Part
Model #
Description
Price
MBM-2105A / 2105 / 2105G/A
10" / 12" Amber Monochrome Monitor. You must send in entire monitor. Ship with extra care for safe arrival.
$135.00
Hantarex
Part
Model #
Description
Price
Polo Servicing the hantarex polo 25", 27" & 33" model only at this time. I am not doing the newer
25" & 33" One of the most fragile boards. please ship with extra care! Repair Price defaults to $140.00 if flyback is original it will be replaced. If you already have a new or newer replacement then the flyback replacement option is your choice. NOW almost all LYTIC CHANGED!
$110.00 $140.00
MTC900 / 900E
19" $140 if replacement flyback
$110.00 $140.00
MTC9000
16" 19" 25" $140 if replacement flyback
$110.00 $140.00
MTC3000
9-12" Amber Monochrome monitor. Darts. You must send in entire monitor. Ship with extra care for safe arrival.
$115.00 $145.00 if new flyback
MTC9110
$140 if replacement flyback
$110.00 $140.00
Kortek
Part
Model #
Description
Price
KT-2901M - KT2602M (LOOKS LIKE THE SHARP KTM-F)
Large screen medium rez / standard rez. 25" / larger $135.00 if new flyback
$110.00 $140.00
KT-2914F / KT-2914DF
Kortek KT-2914F Large screen tri-sync color!
$125.00 $140.00
KTM-F (LOOKS LIKE THE SHARP KTM-F)
Large screen medium rez / standard rez. 25" / larger $135.00 if new flyback.
$110.00
KT-2001M 19"/20" ktmf-20
Telcovision Kortek KT-2001M TYPE 32 Merit-IND KI-2-VO
110.00
KT-2001 KTM-2001
Kortek KT2001 19"
110.00
Matsushita / Atari
Part
Model #
Description
Price
TM-201G TM-202G TM-220 NMX-L21 TM-2020
19" color raster cga - often found in pole positions. $140.00 if new flyback
$110.00 $140.00
Like a Matsushita / clone - variant. NOT SUPPORTED
Almost looks like a Matsushita. Clone / or variant. NOT SUPPORTED
$0.00
Motorola
Part
Model #
Description
Price
XM501 -19" XM701 -23"
B&W Motorola raster.. send in monitor board platform without the glass tube. detach from tube.
$125.00
M5000
19" B&W raster common in space invaders / deluxe
$125.00
KV700 A , M7000
19" B&W raster common in space invaders / deluxe
$125.00
Nanao / Sanwa
Part
Model #
Description
Price
MS8-26SU & MS8-26A 25" MS8-25FBC
25" dual resolution.. switchable. NO MS9-29 SUPPORT
$110.00
Nanao 20" MC- 2000
20" Space Harrier / ab cokpit / thunderlbade / hang ons [5a00110c1] (automatically new caps)
$110.00
Sanwa 20" [v21 pw1545] / turbo
20" Space Harrier / ab cokpit / thunderlbade / hang ons [5a00110c1] (automatically new caps)
$110.00
Neotec
Part
Model #
Description
Price
NT- 500 DX
Tri-sync cga/ega/vga
$135.00
NT- 600DX
Tri-sync cga/ega/vga
$135.00
NT2515C
standard rez **Repair price includes NEW Flyback (FBT) install automatically**
$140.00
NT-2500 / NT- 2501 / NT-2502
25" **Repair price includes NEW Flyback (FBT) install automatically**
$140.00
NT-27E NT-27V & NT-25E
common in sf rush **Repair price includes NEW Flyback (FBT) install automatically**
$140.00
NT-2700 / NT- 2701 / NT-2702 NT-2701-S 2702A
27" **Repair price includes NEW Flyback (FBT) install automatically** 2702-A uses flyback MRCFT-859
$140.00
NT-3500 / NT-3501 / NT-3602 NT-35-C NT-35-E
33" 38" **Repair price includes NEW Flyback (FBT) install automatically** --for 33" only single focus fb's--
$140.00
NT-S500
24.8" standard rez **Repair price includes NEW Flyback (FBT) install automatically**
$140.00
NT-S501
Neotec NT-S501 standard rez .. NOTES: use k7lg b+122
140.00
Nintendo / Sanyo
Part
Model #
Description
Price
Monitor board must be sent in separated from monitor frame / tube else face board damage.
Donkey Kong / Mario Bros , Popeye. One of the best cga monitors ever. Pack with extra care use strong shipping box! If you request original flyback to remain please call / ask ahead. FULL LYTIC CAP OUT / HQ! Boards that arrive cracked due to poor packaging may be rejected.
$140.00
XM-1801
Red Tent $140 if new flyback.
$110.00 $140.00
XM-200-IN sharp
looks like xm-1801
$110.00 $140.00
Pentronic / Makvision
Part
Model #
Description
Price
various models CH-288 family, more. C3129 i do not service
25" 29" 33" 38" CGA OR SWITCHABLE models
$110.00
Qnic
Part
Model #
Description
Price
CGM-2500
25" color raster $140.00 if new flyback
$110.00 $140.00
Sega / Enterprises / LTD
Part
Model #
Description
Price
S-97460-P
13" S-97460-P chassis found in frogger cocktails.
$110.00
SharpImage
Part
Model #
Description
Price
19" Brown Board (older gen)sharp / kortek
KI-2-V0 Marking if new flyback $140.00
$110.00 $140.00
The Brown Board
PL-2 Marking 15.00 if new flyback $140.00 if new flyback
$110.00 $140.00
KTM-F / K1-2-VO
Large screen standard rez or dual scan - medium 34" RCA / RCA-TW$140.00 if new flyback
$110.00 $140.00
KTMF-R SI-325 SI-327 si629dsr SI-727R-DS
Large screen standard rez or dual scan - medium 34" RCA / RCA-TW$140.00 if new flyback
$110.00 $140.00
SI-320
Sharp image SI-320. may have ktw 26 sticker. layout a clone of k7000 25"
$110.00 $140.00
Tatung
Part
Model #
Description
Price
TYPE 32
Touchscreen.
$135.00
TecVideoelectronics
Part
Model #
Description
Price
TEC TM-600 TM-623
Black & white raster. YOU MUST SEND ALONG WITH ORIGINAL YOKE FROM TUBE!.
$115.00
Toei
Part
Model #
Description
Price
TC-RM251S or TC-RM29J
25" color raster cga
110.00
Tripole
Part
Model #
Description
Price
T250-02
Amber 9" dart monitor. / merit put time. Send in entire monitor / tube. Package with extra care for safe ship.
$110.00
VisionPro / Tovis / WG7300 / Happ
Part
Model #
Description
Price
SAM-14C
13" color raster
$110.00 $140.00
13" 19" vp2 mtg-xx01 aka wells k7300
13" 19" Vision Pro / also stamped with Tovis or WG makers mark. $140.00 if new flyback
tri-mode P805 P767 P789 p756 power board (send with accessories, color harness, cables, frame transistor)
$110.00 $140.00
K4500
19" standard rez (GETS A AUTO FULL CAP OUT) *ORIGINAL monitor stocked in Galaxian!*
$110.00
K4800
13" 13k4800's (GETS A AUTO FULL CAP OUT)
$110.00
K4900
19" & 25" Standard or med rez (GETS A AUTO FULL CAP OUT & NEW FLYBACK!) 4900 Flybacks are in stock
$140.00
K5501
19" & 25" Standard or med rez (GETS A AUTO FULL CAP OUT & NEW FLYBACK!) 4900 Flybacks are in stock
$140.00
U5000
dual rez cga/ega P738 25" & 27" (27K5201) $140 if NEW neckboard or flyback is needed
$110.00 $140.00
K5515
25" Looks like a regular 4900. Medium-Resolution 720 / Hard Drivin' New flyback automatically installed.
$135.00
K7000 Series 13" 19" 25" models
P538 (25") Standard or med rez P447 (13"-19") (Near Full Cap Out,!) failing resistor change. New flyback automaticly if stocked with original builds. $110 tag if NO new flyback $140 if new flyback.
$110.00 $140.00
K7201
standard rez P757 / P859 $140.00 if New flyback 19" and 13"
$110.00
K7203
standard rez P819 $140.00 if New flyback
$110.00
6100 (Color Vector)
Tempest / Star Wars / Space Duel, ect / includes hv cage full cap out & lv full rebuild. Send in monitor frame with boards. remove glass tube, send everything attached as shown in
$175.00 $160.00
19V2000
B&W X-Y Vector wells / includes hv cage full cap out. Send in monitor frame with boards attached. remove glass tube. do not send CRT glass tube.
$160.00
19v1000 v1001 // 19" v1003 23"
19" B&W raster common in space invaders / deluxe. Send with entire monitor board platter!
$125.00
WGM1931" 19K3101 19K3102 K3000 U3100
19" VGA
$115.00
D9400 27"
Tri-sync, 9200 replacement
$140.00
D9200 27" - 33"
Older models stamped w/ P857 Tri-sync (If new flyback, same repair price
$140.00
K8000
medium rez 25" 33" -P655 P657 P645 P648 -also fixing standard 13" 19" $140 if new flyback
$110.00 $140.00
p649 power board type
medium rez 25" 33" -P655 P657 P645 P648 -also fixing standard 13" 19" $140 if new flyback
$110.00 $140.00
K7600
39" dual rez. P823 $140 if new fly
$110.00 $145.00
K7500
medium rez P793 25" / 27"
$110.00 $140.00
K7400
standard rez P763 25" / 27" $140 if replacement flyback or NEW neckboard is needed
$110.00 $140.00
K7301 / 7300 aka vision pro / tovis
standard rez
$110.00
K4600
9" standard rez (GETS A AUTO FULL CAP OUT)
$110.00
Promax C5001
Replacement / knockoff board for the k7000 chassis. Use on k7000 25" tube.
110.00
**Single order flybacks now back! No minimum**
Flyback Parts Price List
Free Shipping for USA.
Part
Model #
Description
In Stock
Price
Buy Now
053X0474-001
*NOS* Unearthed 053X0474-001 original wells gardner factory issued flyback brand new! These are the 19V1001(19"), 19V1003(19"), 22V1001(23"), AND 22V1003(23") monitors! B&W raster rare find. When they are gone they are gone! Often found part used on space invaders monitors.
7
$75.00
053X0437-02
6100 wells gardner color vector aftermarket flyback brand new.
2701, 2702, 2700, 27E etc. 2501 25E Neotec aftermarket flyback brand new. Common in most larger screen neotec models.
18
$33.00
MRCFT-252
2701, 2702, 2700, 27E etc. 2501 25E Neotec aftermarket flyback brand new. Common in most larger screen neotec models. If out of MRCFT-252 stock us MRCFT-249
Re-Ordering
$33.00
MRCFT-923C / 923A
SI 429DS-SY si629dsr SI-727R-DS sharp family aftermarket flyback brand new.
8
$33.00
MSU1FDQ504
MS8-26SU Nanao aftermarket flyback brand new.
4
$33.00
MSH-D501 / 2972000072 D562, D452
*NOS* 4600 wells gardner original factory issued flyback brand new.
Re-Ordering
$70.00
MSH1FAP08 / 03
4900 / K5501 wells gardner aftermarket flyback brand new. Used in standard and medium rez 19in & standard 25" Sometimes confuse as MSH1FAP03. the 8 may look close to being 3 on the original label.
15
$33.00
TLF-6041F
Matsushita 19" aftermarket replacement flyback. chassis that uses this flyback often found in pole positions.
Send in your boards for repair at will. No verbal or email approval needed to initiate repair process as long as the model is on the repair list from monitor price list tab. Fill out the repair form and ship away!
Present turnaround time about: 34 - 43 Days
All monitor boards go through thorough analysis and reconditioning after repair to assure long future reliability.
High quality name brand components used. No Bootlegs / No Generics.
Price includes return shipping to you covering USA! Flat Rate Prices.
Please do not forget to send in your remote adjustment board if it uses one.
Important: Please use strong boxes that will not buckle under stacked boxes and pack with care. One or Two inches of padding surrounding your board is strongly recommended. Please don't use worn out boxes. Sanyo EZV's & the Hantaerex polo's are the most fragile of monitor boards and I receive more of these cracked on arrival from inadequate packaging than any other.
Please ship all repairs to:
Chad Entringer
1233 Emilie St.
Green Bay, WI 54301
Payment options: Personal check, money order, paypal, or credit card payment over the phone. You may paypal before or after your board(s) are ready to ship back repaired.
Phone: 920-883-8905
E-mail: Click Here
Service Queue ---- All repairs will be done in the order which received.
.0061uF 1600v 2% Polypropylene capacitor. wells gardner original factory issued 046X0536-075. C69 K7000 (some k7000 boards use single cap in place of c36/c69 (c36 046X0551-003)
Gauntlet Legends Dark Legacy Solid state hard drive kit.
Game ver. 2.52 on flash kit. Great solution for the mechanical hard drive used in the originals. Just plug and play. Shipped price!
Re-Ordering
$40.00
Gauntlet Legends Dark Legacy upgrade kit with security rom, boot & sound!
Game ver. 2.52 on flash kit with security, boot and sound rom! all parts are brand new. This kit will upgrade your original Gauntlet Legends to -> Gauntlet Legends Dark Legacy 2.4. Great solution for the mechanical hard drives used in the originals. Shipped price!
Re-Ordering
$60.00
Killer Instinct 1 IDE Module (imaged w/ 1.0!)
Direct insert Solid State Flash Module!!. NOT COMPACT FLASH. low profile plug and play!. Absolutely awesome and fast. Imaged with KI-1 and comes with U-98 boot rom.
7
$35.00
Killer Instinct 2 IDE Module (imaged w/ 2.1!)
Direct insert Solid State Flash Module!!. NOT COMPACT FLASH. low profile plug and play!. Absolutely awesome and fast. Imaged with KI-2 and comes with U-98 boot rom.
2
$35.00
Gauntlet Legends drop in IDE Module 1.61 hard drive replacement!
Direct insert solid state flash module brand new!!. NOT COMPACT FLASH. low profile plug and play!. Fast and awesome. Imaged with Gauntlet Legends 1.61. NO external power needed. 1 piece drop in module nothing else!.
7
$30.00
Integrated Circuits ICs
TDA1675A
ST Micro original TDA1675A vertical deflection IC NEW
20
$6.00
LA7833
Vertical Deflection Output Circuit Sanyo
20
$4.50
STR30130
Sanken 130v voltage regulator
20
$6.75
STR380
Voltage regulator 123v Sanken T03
4
$10.00
Misc
Convergence Strip.
Crt convergence strips brand new. Price includes shipping. Full size strips. Unable to restock at this time. SOLD OUT
Re-Ordering
$1.35
Replacement self-adhesive heat sink. x5 units.
Use to replace your missing one for Killer instinct, video cards, other applications!. x5 brand new units with self-adhesive tape for $5.00 shipped!
20
$5.00
8pin crt socket
22.5mm neckboard socket found on wells gardner 13" / 19" small neck crts. others.
44
$5.50
20 pack of Large CRT yoke wedges NEW
CRT Yoke Wedges brand new $5.00 per 20 pack. 54mm L x 15mm W x 10mm H
22
$5.00
20 pack of Small CRT yoke wedges NEW
CRT Yoke Wedges brand new $5.00 per 20 pack. 51mm L x 13mmW x 5mmH
30
$5.00
Remote board holder.
004X2572-001 original wells gardner remote board holder brand new. Fits majority of wells models that use adjustment boards.
21
$5.00
Support plastic for wg boards.
004X02577-001 used to seat a handful of wg monitor boards to tray. u2k, u5k, k7400, k7000, k7500, etc.
12
$5.00
CRT convergence ring set. (x2)
For x2 brand new convergence - purity ring assemblies. These do not require a clamp and will stay snug by design. These are for the small neck tubes 22.5mm->23mm. usually indicated by a 8 pin socket.
43
$5.00
CRT purity correction - convergence tabs. (x10)
For one 10 pack of brand new convergence - purity correction tabs.
43
$5.00
19V2000 Service Manual NOS!
NOS wells Gardner 19V200 (b&w x-y vector) original print service manual in complete mint never used condition!. These are NOT REPRINTS and have a print issued date of sept 1980!! has fold out schematics. 21 pages!. waveforms, parts lists, theories and nice write-ups!
NOS! New original wells gardner print on card stock paper. Schematics with other notes.Unearthed rare schematics of the ZENITH variant! didnt exist until now. 6 pages. original print date of october 1990!
3DFX Quantum Obsidian 2 NEW! Security rom 546-0014-02.
Different security rom on your bad card? NO PROB! Midway / Atari game wont boot? dead? likely your card. Original graphics card replacement for many late 90s Midway arcade games. Send in your original video card if security rom is not 546-0014-02 for $15 transplant to a new card with purchase. The security rom installed now is used for Gauntlet Legends, dark legacy & some others.
54
$50.00
P826 Neck board
NEW neck board original used in the k7200 series
Re-Ordering
$38.00
P448(B) K7000 Neckboard. Original brand new.
P448(B) K7000 Neckboard. Large 29mm neck socket
Re-Ordering
$27.00
P632 Remote
aka P802 New remote for k7000 19" & 25" monitors boards. Also use these to sub for remote board p758 used on 7200. Brand new original wells gardner.
190
$17.50
P718 Remote board
New remote board for wells gardner u2000(p717)/& u5000(p738) monitor main chassis board. Original wells!
40
$18.50
Ceronix 2793 Neck board.
Ceronix 2793 CGA video neckboard pcb brand new
1
$42.50
Ceronix remote board for various main boards. pcb 490
Ceronix remote board for 2793, 1492 other ceronix chassis
4
$15.00
P824 remote board.
P824 k7600 remote board brand new original wells gardner. 025A1503-001
4
$17.50
P832 remote board.
P832 remote board brand new original wells gardner. K7200 025A1521-001
7
$17.50
D9200 PD279200 Wells gardner chassis. NO NECKBOARD.
NEW:[Flyback, remote board, regulator of your choice, 22 lytic capacitors, 3w resistor, x2 ps diodes, and x1 Film capacitor. All Lytic capacitors are fresh Panasonic or Nichicon 105deg Type
3
$80.00
G07 Raster Master Repair Kit
High quality components. Full lytic cap out qty 19! All Panasonic or Nichicon caps. Non expired fresh caps almost all 105deg Flyback, caps, horizontal width coil, 1.25a pico fuse, FR401 fusible resistor. Comes with location list and custom technical illustration + hints. The cure for blown fuse & flyback boards.
10
$55.00
G07-CBO 19" NichPan Cap Out Kit
High quality caps. Full lytic cap out qty 19! All Panasonic or Nichicon caps. Non expired fresh caps almost all 105deg Comes with location list and technical illustration + hints. Shipped price!
Capcom CPS1 suicide battery board
resurrection
service with free return shipping. You can find out more about the
suicide
battery story from this link ->The
Dead Battery Society
CPS-1 Board Sets
Repair Price
CPS-1 Q-Sound Board Sets
Repair Price
Three Wonders
$60.00
Cadillacs & Dinosaurs
$60.00
King of Dragons
$60.00
The Punisher
$60.00
Knights of the Round
$60.00
Warriors of Fate
$60.00
Captain Commando
$60.00
Saturday Night Slam Masters ($75.00)
$75.00
Quiz and Dragons
$60.00
Muscle Bomber ($75.00)
$75.00
Capcom World 2
$60.00
Killer Instinct Game Board Repair. - Prices include free shipping for USA order.
Repair work severity - packages.
Scenarios of services rendered.
Repair Price
Lite
Open traces - solder points. Lite Repair work. CPU Cleaning. Current load tests. Gameplay test. ide module hard drive replacement - analysis.
$95.00
Average
Semiconductor replacements, solder points - traces. Longer bench repair time. Gameboard tests - ide module hard drive replacement analysis
$125.00
Major
CPU replacement required. IDE module hard drive replacement + board repair. Solder Points - traces. Extended bench repair time. Gameboard tests - analysis
$150.00
Hard Drive Only
If board only needs a new hard drive, I will supply you with a brand new direct insert Solid State hard drive IDE module. Replaces the mechanical drive. Drive available now for purchase under the Boards/Semiconductors/Misc tab.
$50.00
Hard Drive Upgrade
All repairs include a game image IDE drop in module that will replace your mechanical hard drive. I will still send your original mechanical hard drive back with the repair for your archival purposes.
$35.00
Cup Kudos
Worried? Don't be. Why? Because:
Chad,
I would just like to say thank you for the fantastic job on the k7000 monitor board. After hours of soldering and failing, I am glad I went the professional route! The machine really spruces up my store, and I already have people banging on the door to play it (free play will do that to you!).
If I ever have any more problems with my arcade cabinets, I know who I am going to! Thank you once again, I literally could not be more excited to have this beauty displayed predominantly!
Spenser Brossman,
Owner of Complete in Box Video Games
08-31-2011
"Chad, I swapped PCB's and
you were correct, your repairs were good, the PCB is bad. Thanks for fixing my monitor.
You are a valuable asset to the Golden Era Arcade Collectors.
Bill Beckett
Colorado
"
"Glad to
finally have my
Polo serviced right. All the work done on it was top notch and it
almost looked
like new. The Hantarex Polo is one of the most difficult monitors to
fix, and
you hold a mastery of making those things work when everyone else
is scared to
touch them! I highly recommend your work, very thorough, not like some
of the
competition where they just replace 1 bad component and have the monitor
fail on
you again once the guarantee runs out. Thanks a bunch. -George"
(12-22-2009),
Tinley Park, IL
"I've used Chad's service about
6 times now,
and each and every time has been better than the last. Most recently, I
sent him
a nightmare of a job; two monitor chassis, both wrecked and
robbed, and asked
him to put them together to make one working 27K7502 med res chassis. He
received the parts from me, and I was #25 on his list. I expected to see
the
chassis early Jan 2010. A few days later he said it was ready. The
price he charged me was far below what I expected for such a nightmare
job.If anyone has monitor
issues,
do yourselves a favor, send them to Chad in Green Bay! He is not your
typical
turpentine-drinking, drunken Sconnie! (Yes, I'm a Vikings fan) He is THE
MAN!
Fast service. Great work every time."
(12-22-2009) Dustin B, Bedford, PA
"Hi Chad I received the board
Friday as promised. I installed the board and it worked perfect.
I just want to thank you. You notified me when you received the
board, kept me up to date on the progress and notified me when it
was finished and shipped. A very good and professional
experience. Thanks again Chad"
-Steve Epperson Sterling Heights MI
Thanks to Chad, yet another lost piece of history has been
salvaged! His
Tempest monitor (6100) service can’t be beat! Don’t be
fooled by the
competition! Chad eared my respect and future business. And he’ll
do the
same for you! Thanks again!James Miles, Wilton, NH (03/09/2010)
"Wow again! Thanks for the complete details on everything! If
I have any trouble in the future you'll be the first to know.
Thanks
again." -Brian Brigman, Naperville, IL
"Thanks Chad. I really
appreciate the quick turnaround and the great communication!
Have a great weekend!"
-Ben Wagner, Fort Collins Co.
"Chad, thanks for fixing the KI board, I installed it and its
working fine. I will definitely do business again in the
future. thanks a lot man." -Ron, Round Lake Beach, IL
Chad,
Just wanted to let you know that I hooked the k7000 up today and it
worked beautifully. I still have to do some adjusting on it but I
wanted to thank you for the great work in bringing my toobin' back
to life. I have a few more monitors that I will be sending your way
(pulled from a Defender and an Elevator action/Taito cab) in time.
Just wanted to let you know how much I appreciate the service that
you provide.
-Bob, Massapequa Park, ny
So I see that you sent this back
already. Curious, what happened to be wrong with this board? Thanks
again, you have lived up to your reputation." -Steve Castle, Suwanee, GA
"got it, it works, thanks for the super fast work" -Andy Rosa, Flushing Mi
"That worked! Oh, thank you so much Chad. You have been hugely
professional
in this whole ordeal, from answering every question I had, to
keeping my updated on your progress, to even catching the ONE little
goof that you made. I truly appreciate all the work you've
done." -Jim, Pittsburg, KS
"Hello, Chad. Just wanted to give
you the head’s up that I got the chassis’s the other day and put the
one with the new flyback back together last night. Works perfect!
Haven’t had a chance to test the other since it’s a spare but I’m
confident that one will work fine, too. Just wanted to say thanks
for the quality work. I bought a “substitute” chassis quite awhile
back for a WG that just doesn’t compare to having the original
board. Thanks
again" -Andy, Essex Junction, VT
"Cool! You are becoming my hero you know that?
Last Sunday I got around to dropping the other 6100 you repaired
back into my Tempest and wired it up.
When that thing lit up and went into the test pattern, I
almost wept. I haven't touched a *real* Tempest in probably
near 18 years. It's so cool to play it again like it was meant
to be.
Great feeling! Thanks for the good work." -Jeff , Richmond VA